Moisture reactive pu adhesive

XCUR-M5050N

Moisture-reactive polyurethane hot melt adhesive for textile bonding

Moisture Curing PU Adhesive

III. Characterristic and application:

1.Characteristic: Long operation time for resin, low operation temperature, strong initial adhesive force, fast curing speed, soft handle after curing , high peeling strength, Washable, and will also have high strength and high toughness effect.

2. Application: It can be widely used in garment fabrics, medical supplies - surgical gowns, industrial fabrics and so on.

Pu Glue For Textile

IV. Viscosity curve

V. Processing advice
1. Processing temperature: 80~100℃;

2. Processing humidity: 50~70%, if you need to speed up the curing speed, you can increase the ambient humidity properly;

3. Curing environment temperature: 25~35℃;

4. Since PUR Hot Melt Adhesive is a moisture curing type polyurethane resin, so it must be stored in a sealed bag, if exposed to moisture, the surface cures to form rubber and the viscosity increases dramatically;

5. After opening the bag, it is recommended to use it as soon as possible, but it should not be exposed to the air for a long time;

6. Shelf life：6 months.

VI. Cleaning
1. Use waste cloth to wipe nozzle or barrel to remove excess PUR hot melt adhesive;

2. Add special PUR detergent to mix with unreacted PUR hot melt adhesive for 5~10 minutes.

VII. Precautions for use
1. When using, personnel should take good protective equipment to avoid high temperature scald;

2. The product contains a small amount of isocyanate, in order to avoid prolonged exposure to allergy symptoms, please use in a well-ventilated environment.